WW1 German Helmet Liner Split Pins - New Condition
A set of reproduction WWI German M16, M17, M18 & Austrian / Hungarian German Helmet split pins (Rivets). These were used for attaching the liner to the helmet shell. There were no washers, as used in the WW2 helmets.
So if you need a liner fitting to your World War One helmet you can buy these German made rivets. There are two thinner capped ones and one thicker capped one, this was to allow the fitting of a sniper protection visor at the front of the helmet. All you need do is fit them through the shell and liner holes and bend them back!
These are a tight fit so you may have to use a small hammer or file down one of the sides if you want a loose fit!